A Cross-Sectional Survey on Knowledge and Perceptions of Health Risks Associated with Arsenic and Mercury Contamination from Artisanal Gold mining in Tanzania.

An estimated 0.5 to 1.5 million informal miners, of whom 30-50% are women, rely on artisanal mining for their livelihood in Tanzania. Mercury, used in the processing gold ore, and arsenic, which is a constituent of some ores, are common occupational exposures that frequently result in widespread environmental contamination. Frequently, the mining activities are conducted haphazardly without regard for environmental, occupational, or community exposure. The primary objective of this study was to assess community risk knowledge and perception of potential mercury and arsenic toxicity and/or exposure from artisanal gold mining in Rwamagasa in northwestern Tanzania. A cross-sectional survey of respondents in five sub-villages in the Rwamagasa Village located in Geita District in northwestern Tanzania near Lake Victoria was conducted. This area has a history of artisanal gold mining and many of the population continue to work as miners. Using a clustered random selection approach for recruitment, a total of 160 individuals over 18 years of age completed a structured interview. The interviews revealed wide variations in knowledge and risk perceptions concerning mercury and arsenic exposure, with 40.6% (n=65) and 89.4% (n=143) not aware of the health effects of mercury and arsenic exposure respectively. Males were significantly more knowledgeable (n=59, 36.9%) than females (n=36, 22.5%) with regard to mercury (x²=3.99, p<0.05). An individual's occupation category was associated with level of knowledge (x²=22.82, p=<0.001). Individuals involved in mining (n=63, 73.2%) were more knowledgeable about the negative health effects of mercury than individuals in other occupations. Of the few individuals (n=17, 10.6%) who knew about arsenic toxicity, the majority (n=10, 58.8%) were miners. The knowledge of individuals living in Rwamagasa, Tanzania, an area with a history of artisanal gold mining, varied widely with regard to the health hazards of mercury and arsenic. In these communities there was limited awareness of the threats to health associated with exposure to mercury and arsenic. This lack of knowledge, combined with minimal environmental monitoring and controlled waste management practices, highlights the need for health education, surveillance, and policy changes

Polytopic Cryptanalysis

Standard differential cryptanalysis uses statistical dependencies between the difference of two plaintexts and the difference of the respective two ciphertexts to attack a cipher. Here we introduce polytopic cryptanalysis which considers interdependencies between larger sets of texts as they traverse through the cipher. We prove that the methodology of standard differential cryptanalysis can unambiguously be extended and transferred to the polytopic case including impossible differentials. We show that impossible polytopic transitions have generic advantages over impossible differentials. To demonstrate the practical relevance of the generalization, we present new low-data attacks on round-reduced DES and AES using impossible polytopic transitions that are able to compete with existing attacks, partially outperforming these

Filtering techniques for the removal of ventilator artefact in oesophageal pulse oximetry

The oesophagus has been shown to be a reliable site for monitoring blood oxygen saturation (SpO2). However, the photoplethysmographic (PPG) signals from the lower oesophagus are frequently contaminated by a ventilator artefact making the estimation of SpO2 impossible. A 776th order finite impulse response (FIR) filter and a 695th order interpolated finite impulse response (IFIR) filter were implemented to suppress the artefact. Both filters attenuated the ventilator artefact satisfactorily without distorting the morphology of the PPG when processing recorded data from ten cardiopulmonary bypass patients. The IFIR filter was the better since it conformed more closely to the desired filter specifications and allowed real-time processing. The average improvements in signal-to-noise ratio (SNR) achieved by the FIR and IFIR filters for the fundamental component of the red PPG signals with respect to the fundamental component of the artefact were 57.96 and 60.60 dB, respectively. The corresponding average improvements achieved by the FIR and IFIR filters for the infrared PPG signals were 54.83 and 60.96 dB, respectively. Both filters were also compared with their equivalent tenth order Butterworth filters. The average SNR improvements for the FIR and IFIR filters were significantly higher than those for the Butterworth filters

Structure of hadron resonances with a nearby zero of the amplitude

We discuss the relation between the analytic structure of the scattering amplitude and the origin of an eigenstate represented by a pole of the amplitude.If the eigenstate is not dynamically generated by the interaction in the channel of interest, the residue of the pole vanishes in the zero coupling limit. Based on the topological nature of the phase of the scattering amplitude, we show that the pole must encounter with the Castillejo-Dalitz-Dyson (CDD) zero in this limit. It is concluded that the dynamical component of the eigenstate is small if a CDD zero exists near the eigenstate pole. We show that the line shape of the resonance is distorted from the Breit-Wigner form as an observable consequence of the nearby CDD zero. Finally, studying the positions of poles and CDD zeros of the KbarN-piSigma amplitude, we discuss the origin of the eigenstates in the Lambda(1405) region.Comment: 7 pages, 3 figures, v2: published versio

Mechanisms of Class II correction induced by the crown Herbst appliance as a single-phase Class II therapy : 1 year follow-up

Background The objective of this study is to evaluate the skeletal and dentoalveolar effects of the crown Herbst appliance used alone for a single phase of therapy followed by a 1-year observation period. Methods Forty patients (mean age 13.6 ± 1.3 years) with a stable Class I occlusion 1 year following the treatment with the crown Herbst appliance were selected from a prospective sample of 180 consecutively treated Class II patients. No other appliances were used during treatment or during the follow-up period. The dentoskeletal changes were compared with a matched sample of untreated Class II subjects (mean age 13.9 ± 1.6 years). Lateral cephalograms were taken before treatment, after Herbst treatment (1 year), and after 1-year follow-up. Overcorrection was avoided intentionally. Results Treatment produced an increase in mandibular length, a decrease in ANB angle, and a restriction in the vertical growth of posterior maxilla. The maxillary molars moved backward and tipped distally. The lower incisors proclined markedly, and the upper incisors became retroclined. During the follow-up period, the changes primarily were dentoalveolar in nature, with marked rebound of the upper molars and lower incisors, resulting in some increases in overbite and overjet. Conclusions The occlusal correction of Class II malocclusion observed 1 year after the crown Herbst appliance as a single-phase therapy was achieved primary due to the dentoalveolar changes and only limited skeletal change occurred.publishersversionPeer reviewe

Structure and microstructure evolution of Al-Mg-Si alloy processed by equal-channel angular pressing

An ultrafine grained Al–Mg–Si alloy was prepared by severe plastic deformation using the equal-channel angular pressing (ECAP) method. Samples were ECAPed through a die with an inner angle of F = 90° and outer arc of curvature of ¿ = 37° from 1 to 12 ECAP passes at room temperature following route Bc. To analyze the evolution of the microstructure at increasing ECAP passes, X-ray diffraction and electron backscatter diffraction analyses were carried out. The results revealed two distinct processing regimes, namely (i) from 1 to 5 passes, the microstructure evolved from elongated grains and sub-grains to a rather equiaxed array of ultrafine grains and (ii) from 5 to 12 passes where no change in the morphology and average grain size was noticed. In the overall behavior, the boundary misorientation angle and the fraction of high-angle boundaries increase rapidly up to 5 passes and at a lower rate from 5 to 12 passes. The crystallite size decreased down to about 45 nm with the increase in deformation. The influence of deformation on precipitate evolution in the Al–Mg–Si alloy was also studied by differential scanning calorimetry. A significant decrease in the peak temperature associated to the 50% of recrystallization was observed at increasing ECAP passes.Peer ReviewedPreprin

DNA Damage Triggers Genetic Exchange in Helicobacter pylori

Many organisms respond to DNA damage by inducing expression of DNA repair genes. We find that the human stomach pathogen Helicobacter pylori instead induces transcription and translation of natural competence genes, thus increasing transformation frequency. Transcription of a lysozyme-like protein that promotes DNA donation from intact cells is also induced. Exogenous DNA modulates the DNA damage response, as both recA and the ability to take up DNA are required for full induction of the response. This feedback loop is active during stomach colonization, indicating a role in the pathogenesis of the bacterium. As patients can be infected with multiple genetically distinct clones of H. pylori, DNA damage induced genetic exchange may facilitate spread of antibiotic resistance and selection of fitter variants through re-assortment of preexisting alleles in this important human pathogen

An experimental study of cathodic protection for chloride contaminated reinforced concrete

Cathodic protection (CP) is being increasingly used on reinforced concrete structures to protect steel reinforcing bars from corrosion in aggressive conditions. Due to the complexity of environmental conditions, the design specifications in national and international standards are still open to discussion to achieve both sufficient and efficient protection for reinforced concrete structures in engineering practices. This paper reports an experimental research to investigate the influence of chloride content on concrete resistivity, rebar corrosion rate and the performance of CP operation using different current densities. It aims to understand the correlation between the chloride content and concrete resistivity together with the CP current requirement, and to investigate the precision of the CP design criteria in standards

Protecting against Multidimensional Linear and Truncated Differential Cryptanalysis by Decorrelation

The decorrelation theory provides a different point of view on the security of block cipher primitives. Results on some statistical attacks obtained in this context can support or provide new insight on the security of symmetric cryptographic primitives. In this paper, we study, for the first time, the multidimensional linear attacks as well as the truncated differential attacks in this context. We show that the cipher should be decorrelated of order two to be resistant against some multidimensional linear and truncated differential attacks. Previous results obtained with this theory for linear, differential, differential-linear and boomerang attacks are also resumed and improved in this paper

Genome-Wide Screening for Genetic Alterations in Esophageal Cancer by aCGH Identifies 11q13 Amplification Oncogenes Associated with Nodal Metastasis

Esophageal squamous cell carcinoma (ESCC) is highly prevalent in China and other Asian countries, as a major cause of cancer-related mortality. ESCC displays complex chromosomal abnormalities, including multiple structural and numerical aberrations. Chromosomal abnormalities, such as recurrent amplifications and homozygous deletions, directly contribute to tumorigenesis through altering the expression of key oncogenes and tumor suppressor genes.To understand the role of genetic alterations in ESCC pathogenesis and identify critical amplification/deletion targets, we performed genome-wide 1-Mb array comparative genomic hybridization (aCGH) analysis for 10 commonly used ESCC cell lines. Recurrent chromosomal gains were frequently detected on 3q26-27, 5p15-14, 8p12, 8p22-24, 11q13, 13q21-31, 18p11 and 20q11-13, with frequent losses also found on 8p23-22, 11q22, 14q32 and 18q11-23. Gain of 11q13.3-13.4 was the most frequent alteration in ESCC. Within this region, CCND1 oncogene was identified with high level of amplification and overexpression in ESCC, while FGF19 and SHANK2 was also remarkably over-expressed. Moreover, a high concordance (91.5%) of gene amplification and protein overexpression of CCND1 was observed in primary ESCC tumors. CCND1 amplification/overexpression was also significantly correlated with the lymph node metastasis of ESCC.These findings suggest that genomic gain of 11q13 is the major mechanism contributing to the amplification. Novel oncogenes identified within the 11q13 amplicon including FGF19 and SHANK2 may play important roles in ESCC tumorigenesis